RayScan Mobile

Bedienplatz für RayScan Mobile

Scan

Einblick, links fehlerhaft, rechts fehlerfrei

RayScan Mobile

For stationary objects, e.g. pipes, wings, rotor blades, pillars and statues; adapted to specific tasks

A movable 3D Computed Tomography System for the inspection of stationary objects

Due to its compact design combined with high quality X-ray components and with the powerful software package RayWare®, RayScan Mobile provides a three dimensional insight into test objects even if the objects are only partially accessible.

RayScan Mobile can be applied to the tomographic inspection of pipelines, airplane wings, rotor blades, pillars or statues. The modular design makes it possible to optimise RayScan Mobile for each particular application.

RayScan Mobile has been adapted to investigate the interconnection zones of the worlds largest accelerator ring LHC at CERN. The storage ring has a circumference of 27 km and a diameter of 1100 mm. It is possible to visualise details like solderings, debris and the position of contact fingers with an accuracy of about 0.1 mm.

PDF-Ikon RayScan Mobile (618 KB)


Technical Data
X-ray source (optional)Minifocus 225 kV (450 kV)
Focal spot0.4 mm / 1.0 mm
Size of objects1200 mm
Detector´s active area (optional)205 mm x 205 mm (410 mm x 410 mm)
Number of detector-pixels (optional)1024 x 1024 (2048 x 2048
Digitising16 bit
Time for measurement incl. reconstruction3 - 30 min.
Recognition of detail< 0.1 mm
Contrast1 %
Modes of operatingRadioscopie and ROI
Optional mode3D-CT